Engineering
Load or create a wall to begin...
Material List
m
Enter a wall length and click "Update" to generate material list...
Specification
| Product | Code | Qty |
|---|---|---|
| Masonry | ||
| 190 Blocks | 20.48 | |
| 290 Blocks | 30.48 | |
| Concrete | ||
| Footing concrete | N25 concrete with 20mm max. aggregate | |
| Corefill grout for 190mm blocks | N25 concrete with 10mm max. aggregate | |
| Corefill grout for 290mm blocks | N25 concrete with 20mm max. aggregate | |
| Reinforcement | ||
| Footing top shrinkage reo | SL72 reinforcing mesh | |
| Footing btm shrinkage reo | SL72 reinforcing mesh | |
| Footing btm primary reo | ||
| Footing btm secondary reo | ||
| Footing top primary reo | ||
| Vertical reo for 190mm Blocks | ||
| Horizontal reo for 190mm Blocks | 6000 S shape N12 bars | |
| Vertical reo for 290mm Blocks | ||
| Horizontal reo for 290mm Blocks | ||
| Blockaid for 190mm blocks | BANCL190 | |
| Blockaid for 290mm blocks | BANCL290 | |
| Drainage materials | ||
| Ag line | 90mm diameter agricultural drain in filter fabric | |
| Drainage fill material | 20mm blue metal | |
| Infill | Granular infill material | |
| Geotextile | Synthetic non-woven geotextile membrane | |
| Product | Description | Qty |
|---|---|---|
| Masonry units | Baines | |
| Masonry capping units | Baines capping | |
| Bearing Pad |
5% cement-stabilised crushed rock 10-20mm aggregate
placed as controlled fill class 1 in accordance with AS 4678-2002 |
|
| Infill Concrete |
No-fines concrete: 10 MPa characteristic compressive strength,
1800 kg/m3 density minimum,12mm-20mm aggregate, aggregate to GP cement ratio no greater than 6:1 (by volume). |
|
| Ag line | 90mm diameter agricultural drain in filter fabric | |
| Geotextile | Synthetic non-woven geotextile |
| Product | Description | Qty |
|---|---|---|
| Upper Wall Masonry units |
Baines | |
| Upper Wall Masonry capping units |
Baines capping | |
| Upper Wall Bearing Pad |
5% cement-stabilised crushed rock 10-20mm aggregate
placed as controlled fill class 1 in accordance with AS 4678-2002 |
|
| Upper Wall Infill Concrete |
No-fines concrete: 10 MPa characteristic compressive strength,
1800 kg/m3 density minimum,12mm-20mm aggregate, aggregate to GP cement ratio no greater than 6:1 (by volume). |
|
| Upper Wall Ag line | 90mm diameter agricultural drain in filter fabric | |
| Upper Wall Geotextile | Synthetic non-woven geotextile |
| Product | Description | Qty |
|---|---|---|
| Masonry units | Baines | |
| Masonry capping units | Baines capping | |
| Bearing Pad | 5% cement-stabilised crushed rock 10-20mm aggregate placed as controlled fill class 1 in accordance with AS 4678-2002 | |
| Ag line | 90mm diameter agricultural drain in filter fabric | |
| Geogrids |
Wall Design is outside of allowable program limits. Check inputs - specifically loading and soil types. Contact Baines for further assistance.
Enter your details below and we will be in touch to discuss your quote.
Please enter your details below and Venn Engineering will be in touch to discuss your structural certification requirements. Please be advised that certification charges (once approved by yourself) generally exceed $1000 (depending upon geotechnical requirements) and may require local sites visits.
The Baines Masonry Retaining Wall Designer is a powerful tool that allows you to undertake engineering designs of various different types of retaining walls using Baines Masonry products. It should not be used with any other masonry products.
Before applying this tool to a particular situation, Baines Masonry advises that all users shall seek the advice of professional structural and geotechnical engineers who must take full responsibility for the site specific design including but not limited to: